Canon MB5300 series Online Manual page 940

If a device (e.g. microwave oven) using the same frequency bandwidth as the wireless station is placed nearby,
the device may cause interference. Place the wireless station as far away from the interference source as
possible.
Make sure that the network settings of the computer are correct.
Check11
Make sure that the computer can communicate with the access point over the wireless LAN.
Make sure that Enable bidirectional support is selected in the Ports sheet of
Check12
the properties dialog box of the printer driver.
Make sure that the firewall of the security software is disabled.
Check13
If the firewall function of your security software is turned on, a message may appear warning that Canon
software is attempting to access the network. If the warning message appears, set the security software to
always allow access.
If using any programs that switch the network environment, check their settings. Some programs will enable a
firewall by default.
When using a router, connect the machine and computer to the LAN side
Check14
(same network segment).
If the problem is not resolved, perform setup again with the Setup CD-ROM or perform it according to the
instructions on our website.
Downloaded from ManualsPrinter.com Manuals 940