Canon MB5300 series Online Manual page 1072

1755
Cause
The ink has run out.
Action
To maintain both machine and print quality, the machine cannot continue printing under the ink out
condition.
Cancel printing and replace the ink tank before printing again.
Important
• Do not remove an ink tank until a new one is prepared to be installed.
• Once you remove an ink tank, the machine will not operate until a new one is installed.
• Once you remove an ink tank, the machine will not operate even if the removed ink tank is just
reinstalled.
Note
• Since the information contained in the fax may be lost if it is printed in this condition, the received fax
will not be printed and will be stored in the machine's memory until the ink is replaced. You must
manually print out faxes that were stored in the memory. You can change the setting so that the
received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax
information may not be printed because of the ink out condition.
Downloaded from ManualsPrinter.com Manuals 1072