Uv Phototube; Pyroelectric Device; Thermopile; Figure 29 Fl3100 Picture - General Monitors TA402A Instruction Manual

Zero two series trip amplifier module for flame detection applications
Table of Contents

Advertisement

Detector Assembly/Accessories

6.2 UV Phototube

The UV phototube is used in the Models
FL3000, FL3100, FL3001, FL3101. This
phototube responds to UV radiation within a
range of 185nm to 260nm (wavelength).
The shortest wavelength of energy from the
Sun (figure 30), that reaches the Earth' s
surface is about 300nm. Therefore, the UV
phototube will not respond to energy from
sunlight.

6.3 Pyroelectric Device

The pyroelectric device is used in the
Models FL3000 and FL3002. This device
responds to a change in IR radiation with a
wavelength centered on 4.3 microns (figure
29).
The circuit using the pyroelectric
device in the detector is designed such that
the ' flicker rate" of IR radiation from a
flame can be compared with the known
"flicker rate" of fire.

6.4 Thermopile

The thermopile device is used in the Model
FL3002. This device measures the intensity
of IR radiation with a wavelength centered
on 4.3 microns. The thermopile device will
not respond to energy from sunlight at this
wavelength because most of it is absorbed
(or attenuated) by carbon dioxide in the
atmosphere.
Fig ure 32
General Monitors
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents