Exit Saving Changes; Exit Discarding Changes; Load Setup Defaults; Discard Changes - Wincor Nixdorf E1-CPU User Manual

Pos motherboard with intel mobile celeron processor/intel pentium 4-m processor

Table of Contents



<Esc> does not exit this menu. You must select one of the options from this

menu or <F10> from the legend bar to exit this menu.

Exit Saving Changes

Once you have finished making selections, choose this option from the Exit

menu to ensure the values you selected are saved to the CMOS RAM. The

CMOS RAM is sustained by an onboard backup battery and stays on even

when the BEETLE is turned off. Once this option is selected, a confirmation is

asked. Select [Yes] to save changes and exit.

This option should only be used if you do not want to save the changes you

have made to the Setup program. If you have made changes to fields other than

system date, system time, and password, the system will ask for confirmation

before exiting.

This option allows you to load the default values for each of the parameters on

the Setup menu. When this option is selected or if <F9> is pressed, a confirma-

tion is requested. Select [Yes] to load default values. You can now select Exit

Saving Changes or make other changes before saving the values to the non-

volatile RAM.

This option allows you to discard the selections you made and restore the val-

ues you previously saved. After selecting this option, a confirmation is re-

quested. Select [Yes] to discard an changes and load the previously saved

values.

This option saves your selections without exiting the Setup program. You can

then return to other menus to make changes. After selecting this option, all

selections are saved and a confirmation is requested. Select [Yes] to save all

changes to the non-volatile RAM.

Table of Contents