Legacy Usb Support [Disabled]; Usb Timeout Value [High]; Onboard Lan Bootprom [Enabled]; Quickboot Mode [Disabled] - Wincor Nixdorf E1-CPU User Manual

Pos motherboard with intel mobile celeron processor/intel pentium 4-m processor

Table of Contents

Legacy USB Support [Disabled]

This motherboard supports Universal Serial Bus (USB) devices. The default of

[Disabled] the USB controller is disabled no matter whether you are using a

USB device or not. The enabling of the controller will run with the help of a USB

compliant operating system like Windows XP or else. If the point stands on

[Enabled] the legacy USB support from the BIOS is started. Now it is possible to

use a USB keyboard to start this setup or with the standard DOS environment. If

you like to use a USB-Floppy disk or a USB CD-ROM device for booting, you

have to enable this setup point and after detecting of this USB device from the

BIOS, you have to switch the boot order to the appropriate device.

Configuration Options: [Disabled] [Enabled]



N o t e : S e l e c t i n g L e g a c y U S B S u p p o r t [ D i s a b l e d ] h a s i mp a c t o n " B o o t O r d e r "

i n " B O O T " Me n u , r e s e t t i n g t h i s f i e l d d o i t s d e f a u l t v a l u e a n d l o c k i n g i t . S e e

" B o o t O r d e r " d e s c r i p t i o n .

If Legacy USB Support [Enabled] you can select USB TimeOut Value [High],

[Low]. Connecting an USB-Floppy or any other mechanical driven USB device

to USB port needs [High] for proper function. Using a solid state device (i.e.

USB CompactFlash) the entry [Low] might be selected, avoiding time delay

during booting the system.

This point switches on or off the PXE PROM from the onboard LAN submodul if

it is installed. Configuration Options: [Disabled] [Enabled]

This setup mode speeds up the progress of booting the system a lot.

Configuration Options: [Disabled] [Enabled]

Some systems may be configured without a full screen display, just using a

small display connected to the COM3 serial port. [Enabled] will redirect diagnos-

tic information during PowerOnSelfTest to this serial port, giving control about

the system to smaller displays as well.

Table of Contents