Konica Minolta Magicolor 2450 User Manual page 58

USB
PARAL-
LEL
ACTIVE
I/F
44
NET
ZONE
NET
ZONE2
Settings
ETHERNET
SPEED
Specify the transmission speed for the network and
the transmission method for bi-directional
transmission.
Settings
PS
PROTOCOL
Select whether PostScript jobs are received in the
binary format or the quoted format.
Settings
ENABLE
If
YES
If
NO
Settings
JOB
TIMEOUT
Specify the length of time (in seconds) until the print
job being received is timed out when USB is being
used.
Settings
JOB
TIMEOUT
Specify the length of time (in seconds) until the print
job being received is timed out when Parallel is
being used.
Settings
ETHERNET/PARALLEL
Specify the interface to be used.
An Ethernet and parallel connection cannot be used at the same
time.
,
Settings
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum
of 16 characters.
Settings
-
Specify the Macintosh EtherTalk zone.
The zone name can contain a maximum
of 16 characters.
AUTO/100 FULL DUPLEX/
100 HALF DUPLEX/
10 FULL DUPLEX/
10 HALF DUPLEX
BINARY/QUOTED BINARY
YES/NO
is selected, USB is enabled.
is selected, USB is disabled.
0-60-999
0-30-999
Configuration Menu Overview