Konica Minolta Magicolor 2450 User Manual page 51

DUPLEX
ORIEN-
TATION
PAGE
RECOV-
ERY
Configuration Menu Overview
Settings
TRAY
CHAINING
If
YES
out of paper during printing, a paper tray loaded with
paper of the same size is automatically selected so
printing can continue.
If
NO
out of paper, printing stops.
MAP MODE
LOGI-
CAL
TRAY
0-9
Settings
OFF/SHORTEDGE/LONGEDGE
If is selected, duplex printing is not possible.
OFF
If is selected, the pages will be printed on both sides
LONGEDGE
of the paper for long-edge binding.
If is selected, the pages will be printed on both
SHORTEDGE
sides of the paper for short-edge binding.
Settings
PORTRAIT/LANDSCAPE
Specify the orientation of the media.
Settings
ON/OFF
Select whether or not the page is printed again after recovering
from a paper misfeed.
If is selected, the page that was misfed is printed again.
ON
If is selected, printing continues with the next page without
OFF
printing the misfed page.
YES/NO
is selected and the specified paper tray runs
is selected and the specified paper tray runs
Settings
ON/OFF
Select whether or not the Tray Mapping
function is used.
Settings
PHYSICAL TRAY 1/
PHYSICAL TRAY 2
Specify whether jobs received from
another manufacturer's printer driver are
printed using Tray 1 or Tray 2.
PHYSICAL TRAY 2
for
LOGICAL TRAY 2
all other logical trays is
.
TRAY 1
is the default only
. The default for
PHYSICAL
37