Configuration Menu Overview
SUBNET
MASK
ENABLE
HTTP
ENABLE
AUTO
IP
IPX/SPX FRAME
TYPE
ETHER
NAME
TALK
NAME2
Setting
0.0.0.0
Specify the subnet mask for the network.
Use the Up, Down, Left, and Right keys
to specify the value.
Setting
YES/NO
Specify whether or not HTTP is used.
If
is selected, the Web page pro-
YES
vided to the printer by the built-in HTTP
server is enabled.
If
is selected, the Web page cannot
NO
be used.
Setting
YES/NO
Select whether or not the IP address is
automatically acquired when DHCP/
BOOTP and PING, ARP are not
functioning or when there is no response.
If
is selected, the IP address is not
NO
automatically acquired.
If
is selected, the IP address is
YES
automatically acquired.
Settings
AUTO/802.2/802.3/
ETHER II/SNAP
Specify the protocol used with NetWare.
Settings
magicolor 2450
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
Settings
-
Specify the name of the printer for finding
printers with Macintosh EtherTalk.
The printer name can contain a maxi-
mum of 16 characters.
43