Symptom
Media is
misfeeding.
116
Cause
Transparencies have
collected static elec-
tricity in the tray.
Unsupported media
(wrong size, thick-
ness, type, etc.) is
being used.
The media feed roller
is dirty.
Solving Problems with Media Misfeeds
Solution
Remove the transparencies and load
them in Tray 1 one sheet at a time. Do
not fan transparencies before loading
them.
Use KONICA MINOLTA-approved
media.
See "Media Specifications" on page
52.
Clean the media feed roller.
For more details, refer to "Interior" on
page 97.