Wall Mounting - Panasonic KX-UT113 Operating Instructions Manual

Installation and Setup

Wall Mounting

Before Mounting on a Wall
To mount the unit, it is necessary to remove the stand. For details, see "Removing the Stand (Page 59)".
Mounting the Unit
WARNING
•
Do not mount the unit in a manner other than that described in this section.
•
Make sure that the wall that the unit will be attached to is strong enough to support the unit (approx.
1.09 kg).
If not, it is necessary for the wall to be reinforced.
•
Only use the optional wall mount kit with the unit. The wall mount kit includes the necessary screws,
washers, and wall mounting adaptor.
•
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths or metal
plates in the wall.
•
When this unit is no longer in use, make sure to detach it from the wall.
CAUTION
•
Make sure the cables are securely fastened to the wall.
1.
Insert the 5 tabs (for KX-UT133/KX-UT136) or 3 tabs (for KX-UT113/KX-UT123) of the wall mounting
adaptor into the designated openings in the base, and then slide the wall mounting adaptor in the direction
of the arrow until it clicks.
For KX-UT133/KX-UT136:
66 Operating Instructions Document Version 2011-09