KX-A239AL (PQLV206AL)/KX-A239BX (PQLV206CE)/KX-A239UK (PQLV206E)/KX-A239X
(PQLV206)
–
For KX-UT113NE/KX-UT123NE/KX-UT133NE/KX-UT136NE:
KX-A239CE (PQLV206CE)
–
For KX-UT113RU/KX-UT123RU/KX-UT133RU/KX-UT136RU:
KX-A239BX (PQLV206CE)
–
For users in Malaysia, Singapore, Hong Kong, and Saudi Arabia:
KX-A239EJ (PQLV206E)
•
The AC adaptor is used as the main disconnect device. Ensure that the AC outlet is installed near
the unit and is easily accessible.
When connecting a headset
•
Ensure that the headset cord has slack and is not pulled tight during use to prevent damage to the
connectors.
•
Cords used to connect devices to the EHS jack or headset jack must be less than 3 m in length.
Notice
It is recommended that you use one of the following headsets:
•
For KX-UT113X/KX-UT123X/KX-UT133X/KX-UT136X:
–
–
•
For KX-UT113NE/KX-UT123NE/KX-UT133NE/KX-UT136NE:
–
–
•
For KX-UT113RU/KX-UT123RU/KX-UT133RU/KX-UT136RU:
–
–
When selecting Ethernet cables (not included)
•
Use flexible, high-quality, snagless (without strain relief) cables. Do not use cables with coating
that may tear or crack when bent.
To prevent damage to the cables, use cables that do not protrude from the bottom of the base.
Document Version 2011-09
Wired headsets
Panasonic KX-TCA400, KX-TCA430, RP-TCA400, and RP-TCA430
EHS headsets (KX-UT133/KX-UT136 only)
Plantronics
Savi
Talk, Voyager™, or CS series
®
®
Wired headsets
Panasonic RP-TCA400 and RP-TCA430
EHS headsets (KX-UT133/KX-UT136 only)
Plantronics Savi Talk, Voyager, or CS series
Wired headsets
Panasonic RP-TCA400 and RP-TCA430
EHS headsets (KX-UT133/KX-UT136 only)
Plantronics Savi Talk, Voyager, or CS series
Installation and Setup
Operating Instructions
63