Changing Default Settings; To Set The "Memory Recall" Function - Konica Minolta Di2010 User Manual

5.3 Changing Default Settings

5.3 Changing Default Settings
The procedures for changing each of the User's Choice settings are described be-
low.

To set the "Memory Recall" function

This function is used to specify whether or not the last image copied can be recalled
and printed again.
1
Press the [Utility] key.
2
Touch [User's Choice].
3
Touch [1/6], and then touch
[Memory Recall].
4
Touch [ON] or [OFF], and then
touch [Enter].
❍ If [ON] is selected, the
previously copied image data
can be printed again, even
after copying has finished or
while the copier is in stand-by.
5
Touch [END] to return to the Utility screen, and then touch [Exit] to return to the
Basics screen.
Di2010/Di2510/Di3010/Di3510
5
5-7