Engine Cooling System; Tire Pressure And Condition - Winnebago 2004 Itasca Sunstar Owner's Manual

Engine Oil Dipstick
Engine Oil Fill Access
Oil Fill
Engine Coolant
Access
Reservoir

ENGINE COOLING SYSTEM

Refer to your chassis operating guide for in-
formation and precautions on filling, servicing
and checking the fluid level.
checked at regular intervals when tires are cold,
and filled to the tire manufacturers recommenda-
tions. Incorrect cold inflation pressures (high or
low) lead to abnormal tire wear and unusually hot
running temperatures, factors which may seri-
ously affect safety and lead to poor road handling
and the possibility of blow-outs or throwing of
tread at high speeds.
tires originally equipped on your vehicle is
stamped on the Vehicle Certification Label locat-
ed on the bottom inside of the driver's door.
Maintaining the proper tire air pressure is an im-
portant factor which contributes directly to the
life of the tire.
and abnormal wear and also affects handling and
fuel economy. Obtain proper inflation pressures
from your Volkswagen Owner's Manual or tire
manufacturer.
Brake Fluid
NOTE: Always include the spare tire when
Reservoir
condition and must have sufficient tread depth.
Replace your tires when:
1. The tires are worn to a point where 2/32
SECTION 9
CARE & MAINTENANCE
CAUTION
When refilling the coolant system of
a vehicle equipped with a rear auxil-
iary automotive heater and motoraid
water heater, be sure to allow for
additional coolant capacity of the
heater and its supply and return
hoses.
TIRE PRESSURE AND
CONDITION
Your vehicle's tire inflation pressure must be
The recommended cold fill pressure of the
Low air pressure results in tire overloading
checking tire inflation pressures.
The tires on your vehicle must be in good
inches or less tread remains, or the cord or
fabric is showing. To aid in the detection of
minimum tread depth, your tires may have
built-in tread wear indicators which appear
9-5