Reading Parameters; Aiming System; Good Read Green Spot Duration - Datalogic QuickScan QD2430 Quick Reference Manual

Reading Parameters

Reading Parameters
Move the reader toward the target and center the aiming pat-
tern and illumination system to capture and decode the
image. See Using the Quickscan™ QD24XX on page 3
information.
The aiming system will briefly switch off after the acquisition
time, and if no code is decoded will switch on again before the
next acquisition. The illuminator will remain on until the sym-
bol is decoded.
As you read code symbols, adjust the distance at which you
are holding the reader.

Aiming System

A number of options for customizing control of the Aiming
System are available. See the QuickScan QD24XX PRG for
more information and programming bar codes.

Good Read Green Spot Duration

Successful reading can be signaled by a good read green spot.
Use the bar codes that follow to specify the duration of the
good read pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
Disabled
Medium (500 ms)
16
ENTER/EXIT PROGRAMMING MODE
for more
♦ Short (300 ms)
Long (800 ms)
QuickScan™ QD2430