Configuring The Interface - Datalogic QuickScan QD2430 Quick Reference Manual

Configuring the Interface

Scan the appropriate programming bar code to select the
interface type for your system.
RS-232
RS-232 for use with OPOS/UPOS/JavaPOS
Quick Reference Guide
Unlike some other programming features and
options, interface selections require that you
scan only one programming bar code label. DO
NOT scan an ENTER/EXIT bar code prior to scan-
ning an interface selection bar code.
Some interfaces require the scanner to start in
the disabled state when powered up. If addi-
tional scanner configuration is desired while in
this state, pull the trigger and hold for 5 sec-
onds. The scanner will change to a state that
allows programming with bar codes.
RS-232 standard interface
Select RS232-STD
RS-232 Wincor-Nixdorf
Select RS232-WN
Select RS-232 OPOS
Selecting the Interface Type
5