Exit Button; Dynamic Buttons, Controls And Leds - Lab.gruppen PLM Series Operation Manual

Front Panel Interface
7.7

Exit Button

In Menu Mode, pressing the EXIT button
returns the display to the Home View.
7.8

Dynamic Buttons, Controls and LEDs

7.8.1 Communication LED
This bright white LED signifies selection in the Lake Controller, or Controller communication providing visual
confirmation of:
1. Network communication between the Lake Controller and the Lake Processor (Flashing LED).
2. Selection of the Lake Processor in the Lake Controller software (Steady LED).
The Communication LED can be dimmed via the
front panel by selecting Frame menu, and then Front
- Dimming.
7.8.2 Frame Faults and Warnings LED
This LED turns red to indicate a Frame fault and turns yellow to indicate a Frame warning. Additional clari-
fication of the fault or warning is displayed in the LCD. All mute, fault and warning states displayed on the
front panel are summarized in section 9.1.
34
PLM Series Operation Manual Rev 1.3.5
returns back one menu level. In Meter Mode, pressing EXIT
Figure 7-3: LCD with Dynamic Buttons, Controls and LEDs