Help Menu - Konica Minolta IC-304 Plus Service Manual

Control Menu
Run Initiates a test session, after the items for testing in this
session are marked in the check boxes. When Loop Off
is selected, the test session terminates after each test
has been executed. When Loop On is selected, the loop
sequence is toggled on and the test session repeats until
the loop termination condition is reached.
Run Until Fail
Initiates a test session, after the items for testing in this
session are marked in the check boxes. When Loop Off
is selected, the test session terminates after each test
has been executed or until the first failure is detected by
any test, whichever comes first. When Loop On is
selected, the test session repeats until the loop
termination condition is reached or once a failure is
detected, whichever comes first.
Level Menu
User The default setting for the diagnostic testing and operations
on the diagnostic tree that provides indications regarding
faulty field replacement units (FRUs).

Help Menu

Online Help Loads the HTML page that has access to all the topics
below.
JOIND Introduction to the IC-304 print controller Remote Support
Components concept and describes the JOIND components and GUI.
and GUI
Activating Describes the access modes Remote Support and how to
the JOIND run them.
The JOIND Describes the JOIND main window, menus and options.
Main
Window
The JOIND Description of the menu and sub-menus.
Menu
Options
POS Not applicable.
About Displays the JOIND version number and date.
JOIND
75