Setting The Localization Parameters; Configuring The Server Setup - Konica Minolta IC-304 Plus Service Manual

6

1.3.2 Setting the Localization Parameters

1.3.3 Configuring the Server Setup

You configure the measurement unit and language in the Localization window.
1. In the Units area, select the required default measurement unit.
2. In the Language area, select the required interface language.
3. Click Next.
You configure the host name and date and time in the Server Setup window.
Configuring the Host Name
The initial computer name (host name) of the IC-304 print controller is created
automatically during the factory installation. Check with your system administrator
in order to change the computer name.
Note: The host name is taken from the computer name you typed during the
Windows XP operating system Fast Installation. If you reinstalled your
operating system, see Reinstalling the Operating System (Windows XP) on
page 40.
Chapter 1—First Time Setup and Configuration