Defining The Security Settings - Konica Minolta IC-304 Plus Service Manual

14

1.3.7 Defining the Security Settings

Changing the Administrator and Operator Password (Optional)
To change the administrator password:
1. In the Passwords area, clear the Auto log on check box.
2. In the Enter new password box, type a new password.
3. Retype the new password to confirm it and click Apply.
To change the operator password:
1. In the Passwords area, clear the Auto log on check box.
1. In Operator area, type a new password.
2. Retype the new password to confirm it and click Apply.
If any error messages appear, see Error Messages on page 84 for descriptions and
actions to be taken.
If a Novell network is running IPX protocol on your computer, proceed to Installing
and Configuring Novell Client on page 21.
Disk Wipe
In the Disk Wipe area, select the Wipe disk on system shutdown check box.
To configure the Disk Wipe utility so that Disk Wipe is performed automatically on
shutdown, see Setting Up the Disk Wipe Utility on page 28.
Click Next to continue with the configuration.
Chapter 1—First Time Setup and Configuration