Reinstalling The Color Server Software - Konica Minolta IC-304 Plus Service Manual

2.4.2 Reinstalling the Color Server Software

5. The system starts copying the files. This process takes about eight minutes,
and then the following message appears:
Please remove any media from the DVD-RW drive and press
Ctrl+Alt+Del to reboot the computer.
6. Remove DVD #1 from the DVD-RW drive, and press
restart.
7. In the Computer Name and Administrator Password screen, type the name for
the IC-304 print controller—for example,
Important:
Administrator Name and Password
In the
If required, you can change the administrator name and password, but only
at the end of the installation process. See Defining the Security Settings on
page 14.
8. Click Next.
The installation process continues.
9. At the end of the installation the system restarts. You are asked to insert DVD
#2 (application software).
10. Proceed to Reinstalling the Color Server Software.
Important: We recommend that you always disconnect the network cable
before installing software.
1. Insert DVD #2 into the DVD-RW drive.
The IC-304 print controller software splash screen appears.
2. Click Start.
The Acrobat software setup begins.
After the Acrobat software setup is complete, the IC-304 print controller
installation starts.
3. When the License Agreement window opens, click Yes to continue the IC-304
print controller installation.
4. When the installation is complete:
a. Click Finish to restart the computer.
b. Remove DVD #2 from the DVD-RW drive.
c. Proceed to Using the Configuration Wizard on page 53.
+ +
CTRL ALT DELETE
.
IC304_WinXP
area, use the default settings.
41
to