Configuring The Mcafee Virusscan; Installing And Configuring Novell Client For The Ic-304 Print Controller; Performing A Test Print - Konica Minolta IC-304 Plus Service Manual

56

2.4.5 Configuring the McAfee VirusScan

2.4.6 Installing and Configuring Novell Client for the IC-304 Print
Controller

2.4.7 Performing a Test Print

Chapter 2—Reinstalling the IC-304 Print Controller Software
7. In the Step 2 Recovery window, click Next.
8. Click Finish.
The IC-304 print controller workspace appears on your screen.
Note: For your changes to take effect, you must restart the server.
9. To make sure that changes take effect, close all open software and, from the
Windows Start menu, select Shut Down > Restart > OK.
You have completed Restoring the Configuration if you want to change the
administrator name and password, or only the user password, see Defining the
Security Settings on page 14.
If you want to configure the McAfee VirusScan, see Configuring McAfee VirusScan on
page 16.
If you want to install and configure the Novell Client software for the IC-304 print
controller, see Installing and Configuring Novell Client on page 21.
To perform a test print, see Performing a Test Print on page 25.