Formatting The Image Disk - Konica Minolta IC-304 Plus Service Manual

3.4.12 Formatting the Image Disk

3. Restart the IC-304 print controller software.
4. Recreate the problem you have encountered and then click the STOP button.
The IC-304 print controller software closes automatically and the log files are
saved as a Data_logs.cab file in D:\ Shared, or in the location previously
specified in step 2.
Sending the Data Logs
Send the Data_logs.cab file to your your service representative.
Perform the following procedure when suggested as a recovery action.
Important: Formatting erases all data stored in the Storage folder. It is
recommended to back up your data, if possible, to an external device or
network.
1. Close all software programs and wait for them to shut down completely.
2. From the Windows Start menu, select IC-304 > IC-304 Tools > Format Image
Disks.
3. Close all open windows, if required, and click OK.
4. Click OK.
87