Pre-Loaded Software; Disk Configuration; Backing Up And Restoring The Software - Konica Minolta IC-304 Plus Service Manual

2.1.3 Pre-loaded Software

2.1.4 Disk Configuration

2.2 Backing Up and Restoring the Software

The IC-304 print controller is delivered to the customer site preloaded with the
following software:
•
Windows XP operating system with Microsoft Service Pack 2
•
Nero
•
Microsoft Internet Explorer 6
•
IC-304 print controller software
•
Adobe Acrobat 8.0
•
Network parameters (host name, IP address, network services, and protocols)
•
System backup
The following table outlines the IC-304 print controller disk configuration:
Disk 0 C:
Windows XP operating
system
IC-304 print controller
software
Disk 1 Image storage
Disk 2 Image storage
When you back up the IC-304 print controller system partition (partition C), all the
operating system files are copied to partition D. See Backing up the IC-304 Print
Controller System on page 25.
The backup and restore procedures do not require Windows XP operating system
activation, and are not related to the system reinstallation.
Attention: Before performing the backup and restore procedures, make sure
that your computer's configuration is the one that you want to use when
restoring the system.
To back up and restore the software:
1. Back up the system partition C.
Note: For instructions, see
on page 25.
D:
Spool files
Shared files
Output directory files
Automatic Picture
Replacement (APR)
high-resolution files
Backup folder
Backing up the IC-304 Print Controller System
31