Table of Contents
Advertisement
Press the DETAIL button and use TEXTURE to adjust the amount of texture added to the
OCP
picture.
In the camera menu, navigate to the CREATIVE CONTROL > SHARPNESS > DETAIL menu and
CAM
use TEXTURE to adjust the amount of texture added to the picture.
5.9.3 Detail Equalizer
The detail equalizer allows to set the detail levels for shadows, midtones and highlights
individually. In general, shadow areas need less detail enhancement as it increases noise
levels.
OCP
Press the DETAIL button, the NEXT button and select the DETAIL EQ menu. Switch on the
DETAIL EQ item. Now use the SHADOW, MIDTONE or HIGHLIGHT items to adjust the detail
level for each tonal range between 0 and 99.
In the camera menu, navigate to the CREATIVE CONTROL > SHARPNESS > DETAIL EQUALIZER
CAM
menu and switch on the DETAIL EQUALIZER item. Use the SHADOWS, MIDTONES or
HIGHLIGHTS items to adjust the detail level for each tonal range between 0 and 99.
Values below 50 decrease detail while values above 50 increase detail.
5.9.4 Skin Detail
Skin Detail is set up to select a particular color range. The Detail level within this color range
can then be set independently of the rest of the picture.
Skin detail is mainly used to reduce the level of Detail in a person's skin tone to produce a more
attractive picture. Decreasing the Detail level of a person's skin softens the skin tones only. But
the Skin Detail function is not limited to a particular color and so can also be used to achieve
various effects in selected color areas. For example, decrease the detail level of a soccer field
to accentuate the players or increase the Skin Detail level to accentuate a rough surface.
The color range to which the Skin Detail level is applied can be selected automatically or
manually. Three skin detail ranges (called Skin Gates or Sets) can be independently defined;
they can be used at the same time.
Auto Skin Detail
Carry out the Auto Skin Detail procedure as follows:
1.
In the camera menu, navigate to the CREATIVE CONTROL > SHARPNESS > SKIN DETAIL
and use the SKIN GATE item to select 1, 2 or 3 (and not any of the combined options).
2.
Place the cursor in front of the AUTO SKIN DTL function.
3.
Press the select button on the front of the camera. The following appears in the
viewfinder:
LDX Series Software Upgradable Camera Platform User's Guide (v3.1)
ASKIN: window
Chapter 5 - Video setup
77
Advertisement
Table of Contents
