Table of Contents
Advertisement
8.2.4 HD-SDI(B)/VF connector
BNC connector
8.2.5 HD-SDI(A) connector
BNC connector
8.2.6 Microphone 1 + 2 connectors
1
2
XLR 3-pin female
connector
8.2.7 Intercom headset connector
1
5
XLR 5-pin female
connector
LDX Series Software Upgradable Camera Platform User's Guide (v3.1)
This connector is used to output the camera's main (HD-SDI) video signal or the
VF signal. Select the signal (Main or VF) in the
CONFIGURATON > SIGNALS > HD-SDI(B)VIDEO
Refer to
"Video mode" on page 59
signal on this connector.
This socket is used to output the external video signal coming from the XCU.
Select the external signal (EXT1 or EXT2/3) with the External video signal switch
at the back panel.
Refer to
"Video mode" on page 59
signal on this connector.
Pin Description
1
Audio shield
3
2
Audio In (+)
3
Audio Return (-)
Pin Description
2
1
Microphone return
3
2
Microphone
3
Telephone return
4
4
Telephone left
5
Telephone right
Chapter 8 - Connectors
menu.
for a detailed description of the video output
for a detailed description of the video output
Microphone impedance > 200
Phantom power +48 V switchable
Sensitivity range (microphone):
-64 dBu to -22 dBu
Sensitivity range (line)
+10 dBu to +42 dBu
Signal at pin 2 of audio input is in
phase with signal at pin 2 of audio
output.
Microphone level: -64 dBu/-24 dB
(switchable)
Microphone impedance > 600
Output level: +6 dBu nominal
Output impedance: < 50
113
Advertisement
Table of Contents
