Table of Contents
Advertisement
THE SETUP MENU
Decoding the incoming signals depends on the setting of the surround mode. A surround mode is
assigned to each logical input.
There are four possible settings:
STEREO :
SRND :
AUTO :
DTS :
If forced decoding is activated during reproduction, this function has precedence over surround mode
settings.
Activate the SETUP MENU and select the menu item SrndMode.
The display will show SrndMode:
Press the key MENU (53).
The display will show
appear)
Using the keys NEXT (55) and PREV (56) select the input to be set.
Using the keys VAL- (57) and VAL+ (58) select the desired settings.
By pressing the key BACK (54) twice you will reach the menu item selection level.
The display will show SrndMode:
THE SETUP MENU
If the illuminated display window is considered a distraction during reproduction, the unit may be
programmed in such a way that the display will switch off automatically a few seconds after the last
change of control settings (DisplayOffMode: YES). Each time a setting is changed, the display will
illuminate and then turn off again after a few seconds.
If you simply want to check the current status without making a change (i.e. change source or
volume...), press the key DISPLAY (63) on the remote control. The display will iluminate for a few
seconds and will return to Off Mode automatically. During menu activity the display remains on
regardless of the selected mode.
There are two possible settings:
YES :
NO :
Activate the SETUP MENU and select the menu item DisplayOffMode.
The display will show DisplayOffMode:
Using the keys VAL- (57) and VAL+ (58) select the desired settings.
All incoming signals are mixed down to the front channels (2channel
downmix).
Incoming multi-channel signals are reproduced as multi-channel signals,
stereo signals are reproduced with Dolby Pro Logic or Dolby Pro Logic II.
Like SRND setting, except that compressed 2-channel signals, which are
specifically not marked with surround code, are only reproduced via the
front speakers.
All incoming signals are decoded using DTS. Non-DTS coded signals are
not reproduced.
SrndMode:DVD :
AUTO
Display Off Mode is activated
Display remains on
NO (instead of NO it may show YES)
27
Surround mode of the inputs
(instead of AUTO another mode may
Display Off Mode
Advertisement
Table of Contents
