Loudspeaker Distance - Burmester Surround Processor 007 Operating Instructions Manual

THE GLOBAL MENU
In order to produce ideal sound characteristics, it is important that the sound waves of all speakers
reach the listening position at the same time. Since the distance of each speaker from the listening
position usually differs, the setting speaker distance (distance) offers the possibility to delay the
sound radiation of the closer speakers.
First, determine the distance of each system speaker to the listening position in cm and enter
these figures in the table.
NOTE: Scale factor between inch and cm is 2.54 – means: 1inch = 2.54cm
Front left
Center
Front right
Rear left
Rear right
Subwoofer
Extended left
Extended right
Activate the GLOBAL MENU and choose the menu item Distance.
Press the key MENU (53).
The display will show Distance:Front-Left: 0
Using the keys NEXT (55) and PREV (56) choose the speaker which is to be set.
Using the keys VAL- (57) and VAL+ (58) choose the desired setting.
The distance can be adjusted in increments of 20 cm. Select the figure which is closest to the
one measured.
By pressing the key BACK (54) you will reach the menu item selection level.
The display will show Distance:
Distance
__________cm
__________cm
__________cm
__________cm
__________cm
__________cm
__________cm
__________cm
(instead of 0 it may show another figure)
18
Speaker distance