Branch-To-Branch Setting - Planet UMG-1000 User Manual

14.10 Branch-to-Branch Setting

The "Branch-to-Branch Setting" page allows administrator to manage branch to branch.
There are three modes of Branch-to-Branch, Headquarter, Division, and Standalone.
OPERATION MODE
Standalone: Disables the Branch-to-Branch feature.
Headquarter: Specifies the operation mode to Headquarter.
Division: Specifies the operation mode to Branch.
ADD NEW BRANCH
Serial Number: Specifies the BTB serial number of the allowable branch.
Key: Generates the key that will be used as the authentication password when
building the connection between the UMG-1000 Series and the branch.
Call Prefix: Specifies the call prefix of the branch.
Remote Sync Data: Enables or disables the feature "Synchronize data" between
the UMG-1000 Series and the branch.
CONNECT TO HEADQUARTER
Serial Number: Specifies the BTB serial number of the headquarter you want to
connect.
Domain Name/IP: Specifies the host or IP address of the headquarter you want
to access.
Key: Specifies the key that the headquarter has provided as the authentication
password for the branch.
80