Connecting The Etrex Vista C To A Computer - Garmin eTrex Vista C Owner's Manual

Interfacing the eTrex Vista C
The eTrex Vista C is provided with interface connection to a PC using
either a serial port or USB connector cable. Connection to your computer
is necessary for downloading of detailed map from Garmin MapSource
Map Data CDs. You can also save routes, waypoints, and tracks from
the eTrex Vista C to MapSource. Refer to the MapSource User' s Guide
provided with your MapSource CDs.
Before you begin communication between your PC and the eTrex
Vista C you must install the USB drivers contained in the MapSource Trip
and Waypoint Manager CD-ROM. Follow the installation instructions
provided with the CD-ROM and the USB drivers will be installed during
this process.
To connect to your computer using the USB connector:
1. Lift the USB protective cover from the back of the eTrex Vista
C and insert the smaller connector on the USB cable (provided
with the unit) into the matching port.
2. Connect the remaining cable end to your PC USB port.
eTrex Vista C
Appendices
Connecting the eTrex Vista C
to a Computer
Universal Serial
Bus (USB) Port
Lift Cover
85