Installing A Memory Card; Connecting The Device To Your Computer; Transferring Files To Your Device - Garmin Rino 750t Owner's Manual

Installing a Memory Card

You can install a microSD memory card for additional storage or pre-loaded maps.
1 Turn the D-ring counter-clockwise, and pull up to remove the battery pack.
2 In the battery compartment, slide the card holder toward the top of the device, and lift up.
3 Place the memory card with the contacts facing down.
4 Close the card holder.
5 Slide the card holder toward the bottom of the device to lock it.
6 Replace the battery pack, and turn the D-ring clockwise.

Connecting the Device to Your Computer

To prevent corrosion, thoroughly dry the USB port, the weather cap, and the surrounding area before charging or
connecting to a computer.
1 Pull up the weather cap from the USB port.
2 Plug the small end of the USB cable into the USB port on the device.
3 Plug the large end of the USB cable into a computer USB port.
Your device and memory card (optional) appear as removable drives in My Computer on Windows
computers and as mounted volumes on Mac computers.

Transferring Files to Your Device

1 Connect the device to your computer.
On Windows computers, the device appears as a removable drive or a portable device, and the memory
card may appear as a second removable drive. On Mac computers, the device and memory card appear as
mounted volumes.
NOTE: Some computers with multiple network drives may not display device drives properly. See your
operating system documentation to learn how to map the drive.
2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Open the portable device, drive, or volume for the device or memory card.
6 Browse to a folder.
7 Select Edit > Paste.
The file appears in the list of files in the device memory or on the memory card.
40
NOTICE
Device Information