Garmin eTrex Vista C Owner's Manual page 40

eTrex Vista C
GPS Navigation
Using Waypoints
Original
Location
Moving a Waypoint
Project Waypoint
Page
30
New
Location
Projecting a Waypoint
allows you to establish a new waypoint that is a certain bearing and
distance away from that map item.
Projected Waypoint on
the Map
To move a Waypoint on the Map Page:
1. Use the Find Feature to display the Information Page for the
desired waypoint (refer to page 36).
2. Highlight the "Map" button at the bottom of the page and
press ENTER to display the waypoint on the map.
3. Press ENTER again to place a "Move" marker next to the
waypoint.
4. Use the ROCKER key to drag the waypoint to the desired
location on the map and release to place it there. Then press
ENTER.
Projecting a waypoint from any map item (another waypoint, etc.)
To project a waypoint:
1. Select an item from the Find Menu and display the Information
Page.
2. Press the FIND key to display the Options Menu and select
"Project Waypoint."
3. Press ENTER to display the Project Waypoint Page.
4. Enter the distance and bearing to the projected waypoint in
the appropriate fi elds at the bottom of the page and press the
QUIT key to save and exit.