Danfoss DHP-AX Installation And Service Instructions Manual page 31

Symbol
DEFROST
FAN
12.2.4 Operational information
Shows text information about the heat pump.
Message
ROOM
START
EVU STOP
NO HEAT DEMAND
HEAT PUMP START --XX
HEAT PUMP+AUX. HEAT
AUX. HEATER
DEFROST X(Y)
Meaning
Displayed when defrosting is active.
Displayed when the fan is active.
Meaning
Shows the set ROOM value. Standard value: 20°C.
If the accessory room sensor is installed it shows the actual temperature and the indoor
temperature within brackets.
Indicates that there is a need for heat production and that the heat pump will start.
Indicates that the additional function EVU is active. This means that the heat pump is off as
long as EVU is active.
Indicates that there is no heating production demand.
Indicates that there is a heating production demand and will start in the specified number
of minutes.
Indicates that heat production is active with both compressor and auxiliary heater.
Indicates that there is an auxiliary heater demand.
Displayed when defrosting is active. X refers to temperature and Y is the temperature that is
to be reached when it stops defrosting.
VMBMH302 Service – 31