Advertisement
Front wheel alignment
Left
If the cart veers to the left, please use the hex wrench to turn screw A counterclockwise and
Screw B clockwise to adjust the alignment.
If the cart veers to the right, please use the hex wrench to turn screw A clockwise and
screw B counterclockwise to adjust the alignment.
Bag holder strap adjustment
Refer to Figs. 19 and 20:
1. Pull the elastic strap out of the strap buckle as in Fig. 19.
2. Adjust the strap to desired length.
3. Push the elastic strap back to the strap buckle as in Fig. 20.
Right
16
Fig.
Fig. 19
A
Fig.
Alignment adjusting screws A/B
Hex wrench
Fig. 20
B
17
Fig. 18
Advertisement
Need help?
Do you have a question about the CaddyCruiser ONE V3 and is the answer not in the manual?
Questions and answers
how do I unfold fully constructed cart?
To unfold the Caddytek CaddyCruiser ONE V3 cart:
1. Lift the upper bag bracket – Pull the handle and the upper bag bracket as shown in the instructions.
2. Extend the cart – Shake the cart slightly if needed to release the main frame from the holding slot.
3. Install the wheels –
- Press the red button on the front wheel axle and insert the front wheels.
- Press the red button on the rear frame and insert the rear wheels.
Ensure the cart is fully extended and locked before use.
This answer is automatically generated