Advertisement
Folding the cart
Fig. 5
Turn the red knob as shown in
Fig. 5 to release and tighten
the handle.
Fig. 7
Press the red folding button and push the handle downward as
shown in Fig. 7 and Fig. 8 to fold the cart till the main frame clicks
into the holding slot as in FIG. O.
Fig. 9
Push the upper bag bracket downward as
shown in Fig. 9.
Cart folding red
button
Fig. 6
To achieve the optimal folded size, adjust the
nd
handle to the 2
highest location marked by the
small label near red knob as shown in Fig. 6.
Fig. 8
Fig. 10
Fig. 10 shows the cart is folded.
Fig. O
Advertisement
Need help?
Do you have a question about the CaddyCruiser ONE V3 and is the answer not in the manual?
Questions and answers
how do I unfold fully constructed cart?
To unfold the Caddytek CaddyCruiser ONE V3 cart:
1. Lift the upper bag bracket – Pull the handle and the upper bag bracket as shown in the instructions.
2. Extend the cart – Shake the cart slightly if needed to release the main frame from the holding slot.
3. Install the wheels –
- Press the red button on the front wheel axle and insert the front wheels.
- Press the red button on the rear frame and insert the rear wheels.
Ensure the cart is fully extended and locked before use.
This answer is automatically generated