46
Accidental Smoke and Fire Alarms
¾
To silence the alarms and reset the sensor:
1
CODE
1. Press CODE or
+
1
CODE
2. Press
+
, again to reset the smoke alarm.
Smoke and fire panic alarms cannot be cancelled and are always reported to the central station.
If, after disarming the system once, the system still thinks a sensor is open, disarm the system
again.
In the event of an accidental smoke or fire alarm, follow these dealer instructions:
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
_________________________________________________________________________
Dialer Abort
I have ____ seconds to cancel an accidental intrusion or auxiliary alarm before it is reported
to the central station.
Doors and Delay Time Settings
When the system is armed, enter and exit the premises only through designated delay doors.
Entry Delay Time: The time allowed to enter the premises and disarm the system.
Exit Delay Time: The time allowed to leave the premises after arming the system.
Door
Door Location
1
2
3
4
5
6
System Features
Feature
Yes. Press the arming level desired.
Quick Arm
No. Enter arming level, then access code.
Yes. Press
Quick Exit
minutes.
No. I need to disarm my system in order to exit the premises.
Yes. If I re-enter the armed premises during the Exit Delay time, the panel
Exit
Extension
will restart the Exit Delay time.
No. If I re-enter the armed premises during the Exit Delay time, it will con-
tinue to count down and I must disarm the system.
Yes. I can use a key to arm the system. The switch is located:
Keyswitch
Arming
______________________________________________________________
No.
, once to silence the alarm.
Ptn.
1
2
3
4
5
6
My system features include:
D
and exit your armed premises through a delay door within 2
Entry Delay
Exit Delay
:
:
:
:
:
:
:
:
:
:
:
:
Concord 4 Series Security Systems
Need help?
Do you have a question about the Concord 4 series and is the answer not in the manual?
Questions and answers