Fx System Configuration; Terminology - YOKOGAWA FX1002 User Manual

FX System Configuration

Communication Interface User's Manual
(IM 04L21B01-17EN)
Ethernet
Temperature
controller
AC voltage and current
Logarithmic DC voltage
Transmitter power supply
Alarm output
Sec. 3.5 to 3.8
FAIL/status output
*: Option
**: On FXs that have a CF card slot (suffix code -4.)

Terminology

IM 04L21B01-02EN
The FX can be used to configure a system as shown below.
Referenced sections are of the FX1000 User's Manual (IM 04L21B01-01EN.)
Recorder
Signal input
Sec. 3.3
Pulse input *
Sec. 3.10
*
Sec. 3.12
*
Sec. 3.13
*
*
*
Sec. 2.9
• Memory sample
The operation of recording measured data.
• Memory start
The operation of starting memory sampling.
• Memory stop
The operation of stopping memory sampling.
• Display data
The waveform data shown on the FX display. The data recorded at the sampling
interval for the displayed data.
• Event data
Measured data recorded at a sampling interval separate from that of the display data.
• Manual sample
The operation of recording measured data (instantaneous value) manually.
Serial
communication*
RS-232, RS-422A/485
FX
USB port*
Keys
Introduction to Functions
PC
PC
CF card **
USB flash memory
Sec. 2.11
Keyboard
Sec. 2.10
Remote input *
Sec. 7.1
PLC
9