System Group - YOKOGAWA DL350 User Manual

4.1 List of Commands
Command
STOP Group
:STOP

SYSTem Group

:SYSTem?
:SYSTem:BATTery:REMain?
:SYSTem:BEEP
:SYSTem:BSAVe
:SYSTem:CHANnel<x>:SNUMber?
(Serial Number)
:SYSTem:CLOCk?
:SYSTem:CLOCk:DATE
:SYSTem:CLOCk:FORMat
:SYSTem:CLOCk:MODE
:SYSTem:CLOCk:SNTP?
:SYSTem:CLOCk:SNTP:EXECute
:SYSTem:CLOCk:SNTP:GMTTime
:SYSTem:CLOCk:TIME
:SYSTem:CLOCk:TYPE
:SYSTem:CRMode (Cursor Read
Mode)
:SYSTem:HAFormat(Horizontal Axis
Format)
:SYSTem:KEYProtect?
:SYSTem:KEYProtect:EPASsword
(Enter password)
:SYSTem:KEYProtect:MODE
:SYSTem:KEYProtect:RTYPe
(Release TYPe)
:SYSTem:KEYProtect:SPASsword
(Set password)
:SYSTem:KEYProtect:TYPE
:SYSTem:KEYResponse
:SYSTem:LANGuage
:SYSTem:LCD?
:SYSTem:LCD:AUTO?
:SYSTem:LCD:AUTO:MODE
:SYSTem:LCD:AUTO:TIME
:SYSTem:LCD:BRIGhtness
:SYSTem:LCD:BATTery:AUTO?
:SYSTem:LCD:BATTery:AUTO:MODE
:SYSTem:LCD:BATTery:AUTO:TIME
:SYSTem:LCD:BATTery:BRIGhtness
:SYSTem:LCD:MODE
:SYSTem:LOGic?
:SYSTem:LOGic:BORDer (Bit Order) Sets or queries the bit order that is used when you display logic module data
:SYSTem:LOGic:CORDer (Cursor
Order)
4-24
Function
Stops waveform acquisition.
Queries all system settings.
Queries the battery level (%).
Sets or queries whether a beep will sound when an error message is
displayed.
Sets or queries the waveform data backup saving feature when shutting
down.
Queries the instrument number of the module at the specified channel.
Queries all date/time settings.
Sets or queries the date.
Sets or queries the date format.
Sets or queries whether the date and time are displayed.
Queries all SNTP settings.
Uses SNTP to set the date and time.
Sets or queries the time difference from GMT when SNTP is being used.
Sets or queries the time.
Sets or queries whether the date and time are set manually or by using
SNTP.
Sets or queries the mode used to read vertical, marker, and degree cursor
values.
Sets or queries the horizontal axis display format.
Queries all key and touch lock settings.
Enters the password for releasing the main unit's key and touch lock.
Sets or queries whether the main unit's keys and touch panel are locked.
Sets or queries how to release the main unit's key and touch lock.
Sets the password for releasing the main unit's key and touch lock.
Sets or queries what to lock, just the touch panel or both the touch panel and
keys.
Sets or queries the response time of the START/STOP key.
Sets or queries the language to use for messages.
Queries all LCD settings.
Queries all the settings for the feature that automatically turns off the
backlight during DC power operation.
Sets or queries whether the feature that automatically turns off the backlight
is on during DC power operation.
Sets or queries the amount of time until the backlight is turned off during DC
power operation.
Sets or queries the LCD brightness during DC power operation.
Queries all the settings for the feature that automatically turns off the
backlight during battery operation.
Sets or queries whether the feature that automatically turns off the backlight
is on during battery operation.
Sets or queries the amount of time until the backlight is turned off during
battery operation.
Sets or queries the LCD brightness during battery operation.
Sets or queries whether the backlight is on.
Queries all logic display settings.
as waveforms.
Sets or queries the bit order that is used when you use cursors to display
logic module data as bits.
page
4-148
4-149
4-149
4-149
4-149
4-149
4-149
4-149
4-149
4-149
4-150
4-150
4-150
4-150
4-150
4-150
4-150
4-150
4-150
4-150
4-151
4-151
4-151
4-151
4-151
4-151
4-151
4-151
4-151
4-151
4-152
4-152
4-152
4-152
4-152
4-152
4-152
4-152
IM DL350E-17EN