Names Of Parts - YOKOGAWA FX1002 User Manual

Names of Parts

Front View
USB port
(/USB1 option)
A USB port conforming to
USB port
Rev. 1.1.
(/USB1 option)
A USB port conforming to
Rev. 1.1.
Operation cover
Open the operation cover by pulling
the cover while holding down the tab
Operation cover
at the center of the upper section of
Open the operation cover by pulling
the cover.
the cover while holding down the tab
Label (front of the operation cover)
at the center of the upper section of
You can attach a label to the front of the operation
the cover.
cover. You must print the label yourself.
Label (front of the operation cover)
You can attach a label to the front of the operation
cover. You must print the label yourself.
When closing the front cover, press the front cover in until the tab at the center of the upper section of the cover
is all the way up. If the front cover is not closed completely, the water and dust proof capability may be impaired.
If the rubber packing slipped, attach it so that the ribs come to the downside, as shown in the figure. The dust and
When closing the front cover, press the front cover in until the tab at the center of the upper section of the cover
water protection is not guaranteed if it is attached upside down. Attach it firmly, depressing the rib lightly with a finger.
is all the way up. If the front cover is not closed completely, the water and dust proof capability may be impaired.
If the rubber packing slipped, attach it so that the ribs come to the downside, as shown in the figure. The dust and
water protection is not guaranteed if it is attached upside down. Attach it firmly, depressing the rib lightly with a finger.
Rear Panel
Ethernet port
(/C7 option)
A 10Base-T port.
Ethernet port
(/C7 option)
A 10Base-T port.
10
Operation cover opened
Operation cover opened
CAUTION
CAUTION
LCD
Display various operation displays
such as the trend display as well as
LCD
setup displays.
Display various operation displays
such as the trend display as well as
setup displays.
CF card eject button
Used when ejecting the CF card.
CF card eject button
CF card slot
Used when ejecting the CF card.
On FXs that have a CF card slot
(suffix code -4.)
CF card slot
On FXs that have a CF card slot
(suffix code -4.)
Serial port (/C2 option)
RS-232 port.
Power supply terminals and Serial port (/C2 option)
a protective earth terminal
RS-232 port.
Power supply terminals and
a protective earth terminal
Optional terminals (/A[ ], /A4A,
/C3, /F1, /R1, /TPS[ ], and /PM1
options)
Optional terminals (/A[ ], /A4A,
Used to connect optional
/C3, /F1, /R1, /TPS[ ], and /PM1
input/output signal wires.
options)
Used to connect optional
input/output signal wires.
Input terminals
Used to connect input signal
wires from the item you want to
Input terminals
measure.
Used to connect input signal
wires from the item you want to
measure.
IM 04L21B01-02EN