Accumulation; Manual Accumulation; Saved Data; Delete Data - Intelligent Weighing Technology QHD+3 Service Manual

known.

Ensure display is in zero.

Enter the known tare weight by using numeric keys.

Press
minus sign and net indicator.

Place the container on the platform, net weight will be displayed.
The tare will be rounded up according to the readability of the
balance. For example, if a tare value of 103g is entered into the
60Kg scale with 5g readability, then the display will be shown -105g.

5. Accumulation

The balance can totalize weight values or count quantities.

Manual Accumulation

The values (weight and count) shown on display can be add to the memory
by pressing

Place the goods to be weighed.

Wait few seconds for display stability then press

The weight display will be show the total weight, the unit weight display will
be show the number of items and count display will be show the total
accumulated count. The values will be displayed 2 seconds.

The scale must return to come zero or negative number before adding
another samples.

More products can be added by pressing
or until the capacity of the weight display is exceeded.
Display of Saved Data
To check the total value saved, press
zero. Total weight will be displayed two seconds.
Delete Saved Data
To clear the memory, press
- 10 -
to enter, weight will be stored as tare weight and displayed with
key. Set the parameter F1 off – print – au off
the display will be shown saved data.
1 .5 00
0 .5 00
0 .5 00
. It can add up to 99 entries
key when the display is in
- 3 -
0 0
.
1 15
0