4RF Aprisa XE User Manual page 34

DC Cabling
The DC power input is terminated on the front panel of the terminal with two high-current M3 screw
clamps for the positive and negative DC input and a M5 stud for the earth connection.
The DC power cables have pre-terminated lugs to fit into the power input M3 screw clamps on one
end and bare wire at the other end.
The appropriate power cable for the power supply ordered is included in the accessory kit.
Ensure that one terminal of the DC power supply is earthed from the power ground.
24 VDC / 48 VDC cable
The 24 VDC and 48 VDC power supplies are supplied with a 3 metre red/black cable of 2.0 mm
strands of 0.32 mm ).
2
Terminal Power input
+V Positive DC input
-V Negative DC input
Mounting and installing the terminal | 33
Cable colour
Red
Black
(23
2