Drive Data; Delete Trip Data; Delete Overall Data; Device Settings - Univega Bicycle Original User Manual

pressing the button. The respective contents are then
displayed for you. In order to return to the main menu
display from the menu sub-items, you must select the
menu sub-item "Back" and confirm by pressing the
ton. You can also return to the main menu by pressing and
holding the button for three seconds.

7.4.1 Drive data

The following data are displayed in the menu sub-item
"Drive data":
• Trip (in km)
• Trip time (in 00:00:00)
• Trip max (in km/h)
• Trip Ø (in km/h)
• Trip cost (in €)
• Tour (in km)
• Tour Ø (in km/h)
• Tour cost (in €)
• Overall (in km)
• Overall savings (in €)
• Tot. sav. CO (in kg)
2
• Back
Selected the desired item using the
selected item is highlighted in bold. Confirm your selec-
tion by tapping the button. You are taken back to the
menu sub-items.

7.4.2 Delete trip data

Under the menu sub-item "Delete trip data", you can
delete the kilometres indicated for the current day trip.
The following question appears on the display: "Confirm
delete?", and below it "Yes" or "No". Select the desired
item using the / button. The selection is highlighted
in bold. Confirm your selection by tapping the
You are taken back to the menu sub-items.

7.4.3 Delete overall data

Under the menu sub-item "Delete overall data", you can
delete the total kilometres covered. The following ques-
tion appears on the display: "Confirm delete?", and below
it "Yes" or "No". Select the desired item using the
button. The selection is highlighted in bold. Confirm your
selection by tapping the
the menu sub-items.
20 Original User Manual | Pedelec Impulse 2.0
/ buttons. The
button.
/
button. You are taken back to

7.4.4 Device settings

Under the menu sub-item "Device settings", you can select
the following items by pressing the
but-
• Display ➠ Chapter 7.4.4.1
• Drive ➠ Chapter 7.4.4.2
• Miscellaneous ➠ Chapter 7.4.4.3
• Back
Confirm your selection by tapping the

7.4.4.1 Display

Choose from the following using the
• Contrast
• Brightness
• Language
• Unit
• Back
Confirm your selection by tapping the
Contrast: You can select the following values using the
/ button:
Very low contrast
Average
Very high contrast
The change in contrast is implemented immediately. Tap-
ping the button confirms your selection and then takes
you back to the menu sub-item display.
/ button:
button.
/ button:
button.
-35%
-30%
-25%
-20%
-15%
-10%
-5%
"Standard"
5%
10%
15%
20%