Before Every Ride; Setting Up The Bike For The Rider; Fitting The Pedals - Univega Bicycle Original User Manual

8 Before every ride

Although a great deal of care has been taken during
production and assembly, parts may still come loose
or change function during transportation for example.
You should therefore always check the following be-
fore every ride:
• Bell and lighting are working properly and se-
curely fastened
• Brake system is working properly and securely
fastened
• If a hydraulic brake is fitted to your bike, make
sure the lines and connections are tight
• Check the tyres and rims for damage and foreign
bodies and check the wheel runs true, especially
after riding offroad
• Sufficient tread depth on the tyres
• The suspension elements are in working order
and are securely fastened
• Screws, nuts and quick-release devices are se-
cure
• Frame and fork for deformation and damage
• Handlebar, handlebar stem, seatpost and saddle
in the correct position and safely and properly
secured
If you are not sure whether your bike is in a technical-
ly sound condition, do not ride it and have it checked
by a professional bike workshop instead.
12 I General User Manual

9 Setting up the bike for the rider

Road bikes or mountain bikes can also be supplied with-
out pedals.
Proceed as follows if you wish to fit pedals to your bike
yourself:
9.1

Fitting the pedals

› Coat both pedal threads with lubricant (grease).
The left pedal has a left-handed thread which is nor-
mally indicated by an "L" embossed on the axle. The
right pedal has a right-handed thread which is nor-
mally indicated by an embossed "R".
Axle with right pedal thread
› Screw the left pedal anticlockwise into the left
crank.
› Screw the right pedal clockwise into the right crank
(on the side of the bike chain).
› Tighten both pedals using a suitable size 15
open-ended spanner or Allen key. Tighten all
screws to the prescribed torque (➠ Chapter 30
"Technical data"). If you do not do this, the ped-
als may come loose.
Axle with left pedal thread