Returning From A Menu; Switching Off The Pedelec; Drive Unit, Display And Easy-Reach Control; Safety Information - Univega Shimano Steps E8000 User Manual

5.7.3

Returning from a menu

1. Use the / buttons to navigate to the "Quit" option. It has a light
background when selected.
2. Confirm by pressing the Display button. You return to the next highest
level.
5.8

Switching off the pedelec

1. Press the button on the top tube for two seconds. The Shimano
Steps E8000 switches off.
You can switch your Pedelec Shimano Steps E8000 off
from any menu level. The start menu does not need to be
displayed for this.
The last configured settings remain saved.
If the pedelec is not moved for 10 minutes or so, the
Shimano Steps E8000 switches to Standby mode after 10
minutes. After two hours, the Pedelec switches to Sleep
mode.
6.

Drive unit, display and easy-reach control

6.1

Safety information

DANGER
Do not let yourself become distracted by the display. If you do not ful-
ly concentrate on the traffic, you risk being involved in a serious acci-
dent or fall with fatal consequences.
WARNING
Do not attempt any modifications to the drive unit. For example, it is
not permitted to raise the cut-off speed above 25 km/h. Furthermore,
the speed of the push assistance must not exceed 6 km/h. Pedelecs
with modified drive power may no longer comply with the legal
requirements of their relevant country. You may be liable to
prosecution if you ride on public roads with a "tuned" pedelec. There
is also the risk of a technical failure. Modified bikes of this type are
excluded from the warranty and guarantee.
Never attempt to modify the system yourself, as this can cause prob-
lems with the system's operation.
Original User Guide | Pedelec Shimano Steps E8000 Version 1 EN-35