Pushing Assistance; Arrow Buttons; Display - Univega Bicycle Original User Manual

7.1.2 Pushing assistance

First of all, pushing assistance must be activated in the
programming mode ➠ Chapter 7.4.4 "Push assist".
To switch the pushing assistance on, press and hold the
upper arrow button. To receive no further pushing assis-
tance, release the button.
› If you would like to use the pushing assistance
for the first time after switching on, you must
push the rear wheel 30 centimetres in any direc-
tion.
› When the pushing assistance is activated in the
menu, the assist level cannot be switched manu-
ally while the bike is stationary.

7.1.3 Arrow buttons

• You can specify the power-assist level using the
arrow buttons.
• Each time you press an arrow button, the power
assist changes by one level.
• If you press the upper arrow button, the level of
assistance increases by one level each time you
press it.
• If you press the lower arrow button, the assistance
becomes weaker each time you press it.
• If none of the arrows are highlighted in white, the
user is in the neutral assist mode. This means no
energy recovery and no assistance.
16 Original User Manual | Xion Pedelec
7.2

Display

2
4
1 Speed
2 Power-assist mode/energy recovery
3 Battery charge state
4 Remaining range
5 Variably adjustable display
The display in the middle of the handlebar is divided into
five different display panels.
• At the top on the right is your current
• On the left is a display showing the
you have selected or the level of energy recovery.
• In the middle on the right hand-side is the
battery symbol, which tells you the current charge
status of your Pedelec's battery.
• The remaining range
right of the display for the
• Below this you will see
In place of these, the following data can also be
called up:
The distance covered during the trip (in km).
•
The duration of the trip.
•
The average speed of the trip (in km/h).
•
The total mileage (in km).
•
Your personal pedalling contribution as the
•
rider (in Wh).
The power consumption (in A).
•
1
3
5
1
speed.
2
assist level
3
is displayed to the
4
2
power-assist mode.
5
the time, for example.