Battery Information System; Checking The Charge State; Checking The Capacity - Univega Bicycle Original User Manual

5.2

Battery information system

There is a display panel on the outer face of the battery
which includes five LEDs and a battery key or push button.
The LEDs light up as soon as you press the battery key
or push button. Information about the charge state and
capacity of the battery is provided based on the number of
LEDs that light up and the way in which they light up.
DOWN TUBE BATTERY
Battery key

5.2.1 Checking the charge state

a) Down tube battery: Press the battery key briefly, the
LEDs light up and display the current battery charge state.
DISPLAY
5 LEDs light up
•••••
•••• 4 LEDs light up
••• 3 LEDs light up
2 LEDs light up
••
• 1 LED lights up
1 LED flashes
¡
b) Seat tube battery: Press the push button briefly, the
LEDs light up and display the current battery charge state.
SEAT TUBE BATTERY DISPLAY
5 LEDs light up
•••••
•••• 4 LEDs light up
••• 3 LEDs light up
2 LEDs light up
••
• 1 LED lights up
1 LED flashes
¡
5 LEDs flash quickly
1st LED flashes
quickly
14 Original User Manual | Pedelec Impulse 2.0
SEAT TUBE BATTERY
Push button
BATTERY CHARGE STATE
100–80%
80–60%
60–40%
40–20%
20–10%
10–0%
BATTERY CHARGE STATE
100–84%
83–68%
67–51%
50–34%
33–17%
16–0%
0% or overloaded *
Charging fault **
* All 5 LEDs flash quickly: The battery is a) empty and is
being switched off, or is b) overloaded.
a) If the battery is overloaded, it will switch back on after
a short idle period and can then be used normally.
b) If the battery is empty, it will work once again briefly
following a short period of rejuvenation and will then
switch back off. It must now be charged.
** The 1st LED flashes quickly: A charging fault is present.
Please take the battery to your specialist cycle shop.

5.2.2 Checking the capacity

a) Down tube battery: If you hold down the battery key for
roughly five seconds, the LEDs show the current battery
capacity.
SEAT TUBE BATTERY DISPLAY
•••• 4 LEDs light up
3 LEDs light up
•••
•• 2 LEDs light up
• 1 LED lights up
1 LED flashes
¡
b) Seat tube battery: If you press the push button for five
seconds, the LEDs show the current capacity of the battery.
SEAT TUBE BATTERY DISPLAY
5 LEDs light up
•••••
•••• 4 LEDs light up
••• 3 LEDs light up
2 LEDs light up
••
• 1 LED lights up
1 LED flashes
¡
CAPACITY
approx. 81–100%
approx. 61–80%
approx. 41–60%
approx. 21–40%
approx. 0–20%
CAPACITY
100–97%
96–80%
79–60%
59–40%
39–20%
< 20%