Microtech Iii Wall-Mounted Room Temperature Sensors; Wiring Sensors To The Microtech Iii Unit Controller; Specifications - Daikin Enfinity VFC Installation And Maintenance Manual

MicroTech III Wall-Mounted Room
Temperature Sensors (Kit P/N
669529101, 669529201, 669529001)
Figure 25: MicroTech III Wall-Mounted Room Temperature
Sensors (669529201 Not Shown)
Sensor 669529101
Sensor 669529201 Not Shown
General
Microtech III Wall-Mounted Room Temperature Sensors
provide electronic sensing of room temperatures at
wall locations. All sensor models feature a thermistor
(10kΩ) and a green LED for unit status. Tenant override,
setpoint adjustment potentiometer, thermometer, and a
communications port are optional features available in
any combination
This manual provides general information for the
Microtech III Wall-Mounted Room Temperature Sensors.
For installation instructions refer to IM 955
Figure 26: MicroTech III Wall Sensor Details
3.75"
Status LED
(Green)
Mode Control
Slide Switch

Specifications

• Thermistor resistance (10kΩ)
• (Conforms to advance thermal products curve 2)
• Ambient Temperature Limits:
• Shipping and Storage: 40°F to 160°F (–40°C to 71°C)
• Operating: 40°F to 140°F (4°C to 60°C)
• Humidity: 5 to 95% RH, non-condensing
• Locations: NEMA Type 1, Indoor only
• Connections: Color Coded Leads
IM 930-6 • Enfinity Vertical Water Source Heat Pumps
Sensor 669529001
0 to 1.5 K ohm
Potentiometer
Fan Control
Slide Switch
4.59"
Tenant Override Momentary
Push Button Switch
Wiring Sensors to the MicroTech III
Unit Controller
Figure 27: Temperature Sensor Wiring to MicroTech III
Unit Controller (669529101, 669529201)
Figure 28: Temperature Sensor Wiring to MicroTech III
Unit Controller (669529001)
30
t C
herMostat onneCtions
Temperature
Sensor Terminals
MicroTech III Unit
Controller TB1 Terminals
Temperature
Sensor Terminals
MicroTech III Unit
Controller TB1 Terminals
www .DaikinApplied .com