Setup Menu Preference - Silvercrest KH 6521 Operating Instructions Manual

RESOLUTION In this menu input you can set the different resolutions
(480i/576i/720p/1080i/1080p) for the HDMI
output/component video output.
Note:
Be aware that for the TV standard PAL a setting with 50 Hz and for the TV
standard NTSC a setting with 60 Hz must be selected.
COLOR SETTING
In this menu input you can implement the settings, for example, for the brightness,
contrast or hue.
-SHARPNESS
Select this menu input to set one of the predefined sharpness
values (HIGH, MEDIUM or LOW).
-BRIGHTNESS
With the help of the control buttons
from -20 to +20. Subsequently press the
continue.
-CONTRAST With the help of the control buttons
from -16 to +16. Subsequently press the
continue.
-GAMMA Select this menu to set one of the predefined gamma values
(HIGH, MEDIUM, LOW or NONE).
-HUE With the help of the control buttons
9 to +9. Subsequently press the
-SATURATION With the help of the control buttons
level from -9 to +9. Subsequently press the
continue.
-LUMA DELAY Select this menu input to set one of the predefined gamma
values (0 T or 1 T).
HDMI Setup
-ON Select this menu input to activate the HDMI output.
-OFF
Select this menu input to deactivate the HDMI output.
Xvid SUBTITLE
In this menu input you can set the Xvid subtitle language
that is to be the standard used when playing back films.

10.6 Setup menu PREFERENCE

In this menu you can, for example, carry out the settings for the video output,
activate/deactivate the child lock or change the password.
Note:
The menu option PREFERENCE is only selectable when playback is
completely finished.
TV TYPE
-PAL
PAL television standard
-NTSC
NTSC television standard.
AUDIO
In this menu input you can set the language that is to be
the standard used when playing back films.
SUBTITLE
In this menu input you can set the subtitle language that is
to be the standard used when playing back films.
DISC MENU
PARENTAL
Only a few DVDs have a technical age restriction available. If there is no technical
age restriction on the DVD your DVD players child lock feature can not
be activated. The child lock can only function if it is activated on the DVD player
and a corresponding code is available on the inserted DVD.
If you insert a DVD which, according to the child lock, may not be played back
a window appears on the screen, in which you must enter your password and
confirm with
In this way DVDs can be divided into eight different approval classes.
Select one of the following approval classes to protect the playback of
set the brightness
this media class with a password request:
ENTER
button to
1 KID SAFE:
set the contrast 2 G:
ENTER
button to 3 PG:
4 PG 13:
5 PGR:
set the hue from - 6 R:
ENTER
button to continue. 7 NC 17:
set the saturation 8 ADULT:
ENTER
button to
Example
If a DVD was encoded with, for example, approval class 7 or 8 and you have
an approval class setting between 1 and 6 then a message follows and the
password must be entered. Also only parts of the DVD, that is to say certain
film scenes, may be encoded with an approval class or various approval classes.
•
PASSWORD
In the event that you forget your new password you can use the factory preset
password (136900).
DEFAULT
- 11 -
In this menu input you can set the disc menu language that
is to be the standard used when playing back films.
In this menu input you can determine the age restrictions.
Note:
ENTER
. Some DVDs and CDs are encoded with encryption signals.
also suitable for young children
for all age groups
adult supervision recommended;
adult supervision strongly recommended; some scenes are
not suitable for children under 12
for children under 16; adult supervision recommended
for children under 16; adult supervision strongly recommended
not for teenagers under 18 years of age
for adults only
To activate the approval class you must select, in the PARENTAL menu,
the desired approval class and enter the password (136900).
Confirm your entry by pressing the
In this menu input you can change the factory default
password (136900) and assign your own password.
Only the numbers 0-9 can be used.
Note:
In this menu input you can restore the DVD players factory
defaults.
ENTER
button.