Initial Operation Of The Dvd Player; Inserting The Dvd; Inserting Memory Cards/Usb Memory Sticks With Mp3/Wma/ Mpeg4/Jpeg Data - Silvercrest KH 6521 Operating Instructions Manual

Kompernass dvd player user manual
Hide thumbs Also See for SILVERCREST KH 6521:
Table of Contents

Advertisement

Available languages

Available languages

11. Initial operation of the DVD player

After you have ...
placed the DVD player in a suitable location
connected the DVD player to a television by one of the designated
connection options
connected the DVD player, if desired, to a HiFi or Surround system
(analogue/digital) for example a Dolby Digital or DTS receiver
made the remote control ready for operation by inserting the batteries
and know how to activate and operate the OSD menu with the remote
control
... the DVD player is ready for operation.

11.1 Inserting the DVD

To play a disc with the DVD player:
Switch on your television.
Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the Silvercrest
logo on the TV screen
If no disc is inserted into the DVD player's disc tray:
The message NO DISC is displayed on the television screen.
Open the disc tray by pressing the button
trol or on the front panel of the DVD player. OPEN is displayed on the
television screen.
Insert the disc in the disc tray with the inscribed/labled side up.
For two-sided discs: The side you would like to play must face down.
After you have inserted the disc press the button
mote control or on the front panel of the DVD player again to close the
disc tray.
The contents of the disc will now be loaded; this may take a few seconds.
In the meantime LOADING is displayed on the television screen.
11.2 Inserting memory cards/USB memory sticks with
MP3/WMA/ MPEG4/JPEG data.
Note:
The DVD-Player always starts in DVD mode. To read memory cards/USB memory
USB
sticks press the
button on the remote control. The DVD player recognizes
the data formats JPEG, MP3, WMA and MPEG4.
In order to insert memory cards of the types SD, MS/MSPro and MMC into
the DVD player:
Switch on your television.
Make sure that the DVD player is ready for operation.
If the television, the DVD player and possibly other connected devices (i.e. an
audio component) are ready for operation and are switched on and the DVD
player is connected correctly to the television you will now see the Silvercrest
logo on the TV screen
If no disc is inserted into the DVD player's disc tray: The message NO DISC is
displayed on the television screen.
Slide the memory card into the memory card slot.
Then proceed with the following steps depending on the type of memory
card that you want the device to read.
OPEN/CLOSE
on the remote con-
OPEN/CLOSE
on the re-
- 12 -
Warning!
Always make sure that you insert memory cards into the memory card slot as
described hereafter! Under no circumstances bend or buckle the memory
card when inserting into the memory card slot! Slide the memory card up to
the stop in the memory card slot, with a light pressure.
Allow the memory card to slide in without force:
Check to make sure that the memory card is one that the DVD player is
capable of reading.
Do not attempt to insert memory cards of another type in the memory
card slot!
Make sure that you have inserted the memory card into the memory
card slot in the correct manner.
Under no circumstances attempt to force the memory card into the memory
card slot!
Otherwise the DVD player, memory card and the data on the memory card
could be damaged!
Supported memory card types and capacities
Memory cards of the types SD (2 GB not SDHC), MS/MSPro (4 GB), MMC
(4 GB) can be played back.
Note:
Your DVD player can only read storage mediums with several data formats if
each folder contains only one data format.
MultiMediaCard- /SecureDigital memory cards (MMC/SD)
Insert the MMC/SD memory cards with the contacts forward and slide them
straight into the memory card slot.
With this the side of the memory card, on which the contacts are located
must face downwards with the chamfered corner facing to the right.
MemoryStick/memory cards (MS/MSPro)
Slide the MS memory card into the memory card slot, level and with the
contacts facing forward.
With this the side of the memory card, on which the contacts are located
must face downwards with the chamfered corner facing to the left.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kh 6522

Table of Contents