Silvercrest KH 6521 Operating Instructions Manual page 19

Programmed playback (
PROG
Note:
This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt
to execute a function that is not available, the symbol
television screen.
With the "Programme" function you can put together your own film programme
in so far as you can select only certain chapters of an inserted DVD/VCD/S-VCD
for playback. In this way you can determine for yourself the sequence, in which
the chapters are played back. You can compile a maximum of 20 chapters
of a film for programmed play.
PROG
• Press the button on the remote control during playback or when
playback is stopped.
The Programme menu will be displayed on the television screen.
Programme window
First are listed the programme positions 1-10, programme position 1 is
highlighted.
1. With the number buttons enter the number of the title that is to be played
back first. The highlight changes to chapter entry (CH:).
2. With the number buttons enter the number of the chapter that is to be
played back. The highlighting moves to the programme position 2.
3. Select, with the navigation buttons
and enter title and chapter numbers for the programme positions.
• To display the next 10 programme positions select, with the navigation
buttons , the field
You can allocate up to 20 programme positions.
• To delete entries in a programme position select the programme position
ENTER
and press the button.
• To stop the programme function select the field EXIT and press the
button. All allocated programme positions are deleted.
4. You start playback of the programme positions by selecting the field
ENTER
START and press the button.
During the programmed playback the notice PROGRAM appears in the display.
To delete the programmed playback press twice, during playback, the
button on the front panel of the DVD player or on the remote control.
Note:
If you are not sure what number a title and/or chapter to be programmed has
then select the corresponding chapter, during playback of the film, with the
SKIP FWD SKIP BWD
buttons and
on the remote control to superimpose all information from the inserted DVD/VCD/
S-VCD onto the television screen. Here you will find, amongst others, the current
title and chapter numbers.
On this topic see also the section "Superimpose disc information".
)
is displayed on the
, further programme positions
ENTER
and press the button.
DISPLAY
and susequently press the
Superimpose disc information
Note:
This function may not be available on all DVDs/VCDs/S-VCDs! If you attempt
to execute a function that is not available, the symbol
television screen.
With this function you can superimpose all the available information from
a DVD/VCD/S-VCD inserted into the DVD player onto the television screen
during playback.
• For this, during playback, press the
On the television screen will be superimposed:
With DVDs:
• the current title number/the total number of titles
• the current chapter number/the total number of chapters
• the played back so far time in hours, minutes and seconds (TITLE ELAPSED)
• the time to the end of the film in hours, seconds and minutes (TITLE REMAIN)
• the played back so far time of the chapter in hours, minutes and seconds
(CHAPTER ELAPSED)
• the time to the end of the chapter in hours, seconds and minutes
(CHAPTER REMAIN)
With VCDs/S-VCDs:
• the current title number/the total number of titles
• the played so far time of the current playback title on the VCD/SVCD in
hours, minutes and seconds (SINGLE ELAPSED)
• the time to the end of the current playback title in hours, seconds and minutes
(SINGLE REMAIN)
To stop display of the disc information press repeatedly the
until the notice DISPLAY OFF appears on the television screen.
Repeat function for DVDs, VCDs, S-VCDs and audio CDs
With the repeat function you can...
... in the case of DVDs, selectively repeat title, chapter or the entire DVD.
... in the case of VCDs/S-VCDs individual titles and/or the entire VCD/S-VCD
repeatedly playback.
... in the case of audio CDs, playback repeatedly a particular track and/or
the entire CD.
ENTER
To switch on repeat playback...
REPEAT
• Press the
The repeat symbol
notifications:
CHAPTER
STOP
TITLE
ALL
button
To switch off repeat playback press the
back, until no more notifications appear on the television screen.
- 17 -
DISPLAY
button on the remote control.
button several times during playback.
appears in the display with one of the following
Select CHAPTER to continuously repeat the currently playing
back chapter until repeat playback is switched off or play-
back is cancelled by pressing the
Select TITLE to continuously repeat the currently playing
back title until repeat playback is switched off or playback
STOP
is cancelled by pressing the
Select ALL to continuously repeat all available titles on the
disc, thus the entire disc, until playback repeat is switched
off or playback is cancelled by pressing the
twice.
REPEAT
button repeatedly, during play-
is displayed on the
DISPLAY
button
STOP
button twice.
button twice.
STOP
button