Download Print this page

Range Detection; Programming Table - Mongoose M18 User Manual

Automatic keyless-entry car alarm system

Advertisement

Range Detection:

We recommend regular checking of the reception range to ensure continuing performance and security.
After step 3 of above system programming setting, press the Override Switch for 20 times to perform range
detection.
Without pressing any remote button, walk around the vehicle at varying distances away from the vehicle to
check the reception range. Siren will chirp every time when the handset is within reception range.
Turn the ignition OFF to exit this function.

Programming Table:

Override
Switch
Press Once
Press Twice
Press 3 Times
Press 4 Times
Press 5 Times
Press 6 Times
Press 7 Times
Press 8 Times
Press 9 Times
Press 10 Times
Press 20 Times
The placement of Antenna
It is recommended to place the antenna at either of the following places:
1. Rear of the interior rear-view mirror.
2. Inside the A or B column of the driver's side at the height of driver's shoulder.
(The " " indicates the Factory Default settings for each feature)
Press Handset Button to Turn the Functions ON/OFF
Dome Light Delay
Anti-Hijack Mode
Full 5 Main Functions
Central Door Lock Time (0.6 sec.)
1 Chirp when Arming
Safety Door Lock
5sec after IGN ON
Door Unlock upon IGN OFF
Connects to Car Horn
Honk Chirp 30ms
Press the handset button ONCE again to confirm all settings back to
Range Detection (Please view the previous page for the range detection
function.)
Central Door Lock Time (3 sec.)
Connects to Alarm Siren
Factory Default
- 4 -
Disable
Disable
Disable
Mute when Arming
Disable
Disable
Honk Chirp 50ms

Advertisement

loading